063: Stereo Auto Pan - Korg Electronic Keyboard Parameter Manual

Effect Guide
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see "OUTPUT" on page 764.

063: Stereo Auto Pan

Stereo In - Stereo Out
Left
Right
LFO: Tri / Sin LFO Shape
This is a stereo-in, stereo-out auto-panner. The Phase
and Shape parameters lets you create various panning
effects, such as making the left and right inputs seem
to chase each other around the stereo field.
AUTO PAN
Depth
Sets the depth of LFO modulation.
Source
Selects the modulation source of the depth of
modulation.
Amount
Sets the modulation amount of the depth of
modulation.
LFO
Waveform
Selects the LFO Waveform.
Shape
This changes the curvature of the LFO Waveform,
which controls the way that the audio moves around
the stereo field.
Phase [degrees]
This determines the phase difference between the left
and right LFOs. When you gradually change the value
away from 0, the sounds from the left and right
channels will seem to chase each other around. If you
set the parameter to +180 or –180, the sounds from
each channel will cross over each other.
You'll only hear the effect of this parameter if the input
is true stereo, with different signals in the left and right
channels.
816
Wet / Dry
Pan
Depth
Pan
Wet / Dry
LFO Phase
[0...100]
[Off...Tempo]
[+/–100]
[Triangle, Sine]
[+/–100]
[–180...+180]
LFO Phase = 0 degrees LFO Phase = 90 degrees
L-In
R-In
L-In
R-In
L-In L-In
R-In
L-In
R-In R-In
L-In
R-In
Left Center Right
Output Stereo Image
Frequency [Hz]
This sets the LFO speed, in Hz. It applies only when
MIDI/Tempo Sync, below, is Off.
Source
This selects a modulation source for the Frequency.
Amount
This sets the Frequency modulation amount, in Hz.
MIDI/Tempo Sync
BPM
Base Note
Times
When MIDI/Tempo Sync is on, the LFO speed is set by
BPM, Base Note, and Times, instead of Frequency. For
more information, see "MIDI/Tempo Sync" on
page 777.
Type [Individual, Common1, Common2]
This controls whether the effect uses its individual
LFO, or one of the Common FX LFOs. For more
information, see "LFO Type" on page 777.
Common LFO Phase Offset [degrees]
When Type is set to Common FX LFO 1 or 2, this lets
you offset the phase from the master LFO.
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see "OUTPUT" on page 764.
Stereo Auto Pan - LFO Phase
LFO Phase = 180 degrees
L-In L-In
R-In
R-In
L-In
L-In
R-In
R-In
L-In
R-In
R-In
L-In
L-In
R-In
L-In L-In
R-In R-In
[0.02...20.00]
[Off...Tempo]
[–20.00...+20.00]
[Check-box]
[MIDI, 40.00...240.00]
[ ... ]
[x1...x32]
[+/–180]