092: L/C/R Bpm Long Delay; 093: Stereo Bpm Delay - Korg Electronic Keyboard Parameter Manual

Effect Guide

092: L/C/R BPM Long Delay

The L/C/R delay enables you to match the delay time
with the song tempo. You can set the delay time up to
5,460msec
Wet: Mono In - Stereo Out / Dry: Stereo In -Stereo Out
Left
Input Level D-mod
+
High Damp Low Damp
Input Level D-mod
Right
Tempo
BPM
Base Note x Times
BPM
Base Note x Times
Base Note x Times
INPUT
Input Level Dmod [%]
Sets the modulation amount of the input level. p.820.
Source
Selects the modulation source for the input level. p.820.
DELAY
BPM
MIDI syncs to the system tempo; 40-240 sets the tempo
manually for this individual effect. p.822.
Time Over?>
The maximum delay time is 5,460msec. If the
combination of BPM, Base Note, and Times exceeds
this limit, the error message "OVER!" appears in the
display. If this occurs, change the delay time
parameters so that this message no longer appears.
L Delay Base Note
Selects the type of notes to specify the delay time for
the Left Tap. p.822
Times
Sets the number of notes to specify the delay time for
the Left Tap. p.822.
Level
Sets the output level of the Left Tap.

093: Stereo BPM Delay

This stereo delay enables you to set the delay time to
match the song tempo.
842
Wet / Dry
L Delay
Level
C Delay
Spread
Level
Feedback
R Delay
Level
Wet / Dry
[+/–100]
[Off...Tempo]
[MIDI, 40.00...240.00]
[---, OVER!]
[ ... ]
[x1...x32]
[0...50]
C Delay Base Note
Selects the type of notes to specify the delay time for
the Center Tap. p.822.
Times
Sets the number of notes to specify the delay time for
the Center Tap. p.822.
Level
Sets the output level of the Center Tap.
R Delay Base Note
Selects the type of notes to specify the delay time for
the Right Tap. p.822.
Times
Sets the number of notes to specify the delay time for
the Right Tap. p.822.
Level
Sets the output level of the Right Tap.
Feedback (C Delay)
Sets the feedback amount of the Center Tap.
Source
Selects the modulation source for the Center Tap
feedback.
Amount
Sets the modulation amount of the Center Tap
feedback.
High Damp [%]
Sets the damping amount in the high range.] p.829.
Low Damp [%]
Sets the damping amount in the low range. p.829.
Spread
Sets the width of the stereo image of the effect sound.
p.829.
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see "OUTPUT" on page 764.
Stereo In - Stereo Out
Left
Input Level D-mod
Input Level D-mod
Right
Tempo
BPM
Base Note x Times Adjust [%]
BPM
Base Note x Times Adjust [%]
[ ... ]
[x1...x32]
[0...50]
[ ... ]
[x1...x32]
[0...50]
[+/–100]
[Off...Tempo]
[+/–100]
[0...100]
[0...100]
[0...50]
Wet / Dry
High Damp Low Damp
Delay
Feedback
High Damp Low Damp
Delay
Wet / Dry