023: Stereo Analog Record; 024: Stereo Wave Shaper - Korg Electronic Keyboard Parameter Manual

Effect Guide

023: Stereo Analog Record

This effect simulates the noise caused by scratches and
dust on analog records. It also reproduces some of the
modulation caused by a warped turntable.
Stereo In - Stereo Out
Left
EQ Trim
Pre EQ
EQ Trim Pre EQ
Right
Pre EQ
Trim
Sets the EQ input level.
Fc [Hz]
Sets the EQ center frequency.
Q
Sets the EQ band width.
Gain [dB]
Sets the EQ gain.
ANALOG RECORD
Speed [RPM]
Sets the rotation speed of the record.
Flutter
This parameter enables you to set the depth of the
modulation caused by a warped turntable.

024: Stereo Wave Shaper

This is a stereo effect that reshapes the waveform of the
input signal, generating numerous overtones that were
not present in the original signal.
Stereo In - Stereo Out
Left
Scale Pre LPF
Right
D -mod
D -mod
D -mod
WAVE SHAPER
Wave Shape Table
The table determines the basic timbre of the effect.
784
Analog Record
Simulation
[0...100]
[300...10.00k]
[0.5...10.0]
[–18.0...+18.0]
[33 1/3, 45, 78]
[0...100]
Wave Shape Table
LEQ HEQ Output Level
[Sine...Wurly]
NOISE
Density
Sets the noise density.
Tone
Wet / Dry
Sets the noise tone.
Level
Sets the noise level.
Wet / Dry
Source
Selects the modulation source for the noise level.
Amount
Sets the modulation amount of the noise level.
CLICK
Level
This parameter enables you to set the level of the click
noise that occurs once every rotation of the turntable.
This simulation reproduces record noise, and the noise
generated after the music on a vinyl record finishes.
Source
Selects the modulation source for the click noise level.
Amount
Sets the modulation amount of the click noise level.
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see "OUTPUT" on page 764.
Wet / Dry
Wet / Dry
[0...100]
[0...100]
[0...100]
[Off...Tempo]
[+/–100]
[0...100]
[Off...Tempo]
[+/–100]