Korg Electronic Keyboard Parameter Manual page 639

setting the start address, loop start address, and end
address of the sample, use this command to delete
unwanted sample data.
1. Use "Sample Select" (2–1b) to select the sample
that you want to edit, and use "Start (Start
Address)" or "Loop Start (Loop Start Address)"
and "End (End Address)" to specify the region that
you want to edit.
2. Select "Truncate" to open the dialog box.
3. Range "Start" and "End" will show the range of
data that will be edited.
4. Use the radio buttons to select the portion that will
be deleted.
Front & End: The sample data that lies before the
Range "Start" (start address or loop start address)
and after the Range "End" (end address) will be
deleted.
Front: The sample data that lies before the Range
"Start" (start address or loop start address) will be
deleted.
End: The sample data that lies after the Range
"End" (end address) will be deleted.
5. In "Save to No.," specify the save destination
sample number. By default, an unused sample
number will be selected.
The sample number cannot be specified if
"Overwrite" is checked (page 615).
For stereo samples, use "Save to No.(L)" and
"(R)" to specify the save-destination of the L and R
channels.
6. To execute the Truncate command, press the OK
button. To cancel, press the Cancel button.
Time Slice
Time Slice lets you convert a mono or stereo rhythmic
sample, such as a drum loop, into a set of individual
hits and matching sequencer data. You can then:
• Re-create the loop by playing the sequencer data
• Change the tempo of the loop, without altering the
pitch
• Change the pitch of the samples, without altering
the tempo
• Change the rhythmic feel by altering quantization,
swing, etc.
Sampling: Page Menu Commands
• Change the pattern of the loop by swapping or
deleting individual hits, or otherwise editing the
sequencer or sample data
In detail, Time Slice does the following:
• Detects the individual beats in the original loop
• Splits each beat into a separate sample
• Creates a Multisample with the original loop on the
note C2, and the individual beats on separate keys
starting on D2
• Creates a Program which uses the new
Multisample
• Creates Sequencer data to re-create the sound of the
original loop by playing the individual hits
Original rhythm sample: Sample0
Kick Snare Kick Kick
Execute the Time Slice command
Sample1 Sample1
Sample2 Sample2
A multisample and program will be
created automatically
C2
Play in Sequencer mode
120BPM
150BPM
90BPM
Played further apart, but pitch is unchanged
* You can also use the Time Stretch command to control the compression of
each sample to optimize the "spacing" to match the tempo. step 9
Time Slice
120BPM 120BPM
Snare
Sample3 Sample3 Sample4 Sample4 Sample5 Sample5
Played closer together,
but pitch is unchanged
629