070: Pitch Shifter Bpm; 071: Stereo Pitch Shifter Bpm - Korg Electronic Keyboard Parameter Manual

Effect Guide
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see "OUTPUT" on page 764.

070: Pitch Shifter BPM

This pitch shifter enables you to set the delay time to
match the song tempo.
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left
Input Level
+
Pitch Shifter
Input Level
Right
Tempo
BPM
Base Note x Times
BPM
INPUT
Input Level Dmod [%]
Sets the modulation amount of the input level. p.820.
Source
Selects the modulation source for the input level. p.820.
PITCH SHIFTER
Mode
Switches Pitch Shifter mode. p.821.
Pitch Shift [1/2 steps]
Sets the pitch shift amount in steps of a semitone. p.821
Fine [cents]
Sets the pitch shift amount in steps of one cent. p.821
Source
Selects the modulation source for both Pitch Shift and
Fine.
Pitch Shift Amount
Sets the modulation amount for Pitch Shift.
Fine Amount
Sets the modulation amount for Fine.

071: Stereo Pitch Shifter BPM

This stereo pitch shifter enables you to set the delay
time to match the song tempo.
822
High Damp
Delay
Post
Pre
Feedback
Feedback Position
[+/–100]
[Off...Tempo]
[Slow, Medium, Fast]
[–24...+24]
[+/–100]
[Off...Tempo]
[–24...+24]
[+/–100]
DELAY
BPM
MIDI syncs to the system tempo; 40-240 sets the tempo
Wet / Dry
manually for this individual effect. p.822
Time Over?>
The maximum delay time is 2,000msec. If the channel's
combination of BPM, Base Note, and Times exceeds
this limit, the error message "OVER!" will appear. If
Wet / Dry
this occurs, change the delay time parameters so that
this message no longer appears.
Base Note
Selects the type of notes to specify the delay time.
p.822.
Times
Sets the number of notes to specify the delay time.
p.822.
Feedback Position
Switches the feedback connection. p.821.
Feedback
Sets the feedback amount. p.821.
High Damp [%]
Sets the damping amount in the high range.
OUTPUT
This is the standard effects output section, with
modulatable control over wet/dry balance. For more
information, see "OUTPUT" on page 764.
DELAY: Times, Base Note, BPM
The delay time is the duration of Times number of
Base Note note values at the BPM tempo (or if BPM is
set to MIDI, the tempo determined by MIDI Clock).
Stereo In - Stereo Out
Left
Input Level
Input Level
Right
Tempo
BPM
Base Note x Times
BPM
Base Note x Times
[MIDI, 40.00...240.00]
High Damp
Pitch Shifter Delay
Post
Pre
Feedback Position Feedback Spread
Pre
Post
Pitch Shifter Delay
High Damp
[---, OVER!]
[ ...
[x1...x32]
[Pre, Post]
[+/–100]
[0...100]
Wet / Dry
Wet / Dry