Table of Contents
Advertisement
Audio CD
In Sampling mode, the sound from an audio CD in the
internal CD-R/RW drive or a USB external CD drive
can be processed by the insert effects, master effects,
and total effects.
Use the Bus Select setting in the P5: Audio CD -
Ripping page to specify the bus to which the CD audio
will be sent. You can choose from L/R, IFX1–12, 1–8,
1/2–7/8, or Off. If you want to apply an insert effect,
choose IFX1–12.
Fig. 2–5a
Disk mode
In Disk mode P1: Play Audio CD as well you can play
back an audio CD and process the sound through the
insert effects, master effects, and total effects. Bus
Select, Send1, Send2, FX Ctrl Bus, REC Bus, Pan, and
Level are linked with the settings of Sampling mode.
In Disk mode, effects will use the settings of the
mode in which you previously were.
Insert Effects (IFX1...IFX12)
The Send1 (to MFX1) and Send2 (to MFX2) settings
which specify the send levels to the master effects are
valid if Bus Select is set to L/R or Off. If Bus Select is
set to IFX1–12, use the post-IFX Send1 and Send2
settings to specify the send levels.
The diagram (Fig. 2–5a) shows an example in which
the input from the internal CD-R/RW driver or a USB-
connected external CD drive is panned to left and
right, and sent to insert effect 1.
Routing
743
Advertisement
Table of Contents
