Step 21. Your System Unit Is Now Set Up; Step 22. Start The Operating System - IBM eServer pSeries 610 6C1 Installation Manual

Step 21. Your System Unit Is Now Set Up

Arrange your system unit and attached devices so that you can use them comfortably.
If the AIX operating system is not preinstalled on your system and you want to install
the AIX operating system now, refer to the AIX Installation Guide , order number
SC23-4112. Return here to continue after your operating system is installed.

Step 22. Start the Operating System

To start the installed AIX operating system, press the power-on switch on the operator
panel.
v The fans in the system unit start spinning.
v The green power LED on the operator panel comes on solid.
v Checkpoint codes appear in the operator panel display.
5
4
1
2
3
4
5
v Follow the instructions on your display.
The AIX Documentation library is available at the following web address:
http://www.ibm.com/servers/aix/library/techpubs.html. AIX documentation is also
contained on the AIX Documentation CD. The documentation information is made
accessible by loading the documentation CD files onto the hard disk or by mounting the
CD in the CD-ROM drive.
26
Installation Guide
3
2
1
Power-On Switch
Reset Switch
Operator Panel Display
Attention LED (amber)
Power-On LED (green)