Step 12. Connect The Serial And Parallel Devices - IBM eServer pSeries 610 6C1 Installation Manual

Step 12. Connect the Serial and Parallel Devices

If you have a local ASCII terminal (5) or a single serial device, connect it to the serial
connector S1 (1).
Note: If you have a remote ASCII terminal, connect it through an external modem to
Connect any additional serial devices to the S3 connector (3) if it is not already in use.
If you have a parallel device (such as a printer), connect it to the parallel connector (4).
16
Installation Guide
serial connector S1, and connect a local ASCII terminal to serial connector S2
(2).
3 1
2
5
2
3
4
1
4