IBM eServer pSeries 610 6C1 Installation Manual page 67

9. Insert the memory module firmly into the connector.
10. Secure the memory DIMM with the locking tabs located at each end of the
connector.
11. Replace the memory card into the system unit. See "Installing a Memory Card" on
page 46 for more information.
12. If you have other options to install, refer to "Option List" on page 36.
If you do not have other options to install, replace the processor and memory card
cover as described in "Removing and Replacing Processor and Memory Card
Cover" on page 41.
13. Replace the system unit covers as described in "Replacing the Service Access
Covers" on page 77.
Locking Tabs
Chapter 3. Installing Options in Your System
51