Step 17. Are You Using an Ethernet Connection?
Ask your system administrator if you are unsure whether you are using an Ethernet
connection. If you are not using Ethernet or you have already connected your Ethernet
to an adapter, continue with "Step 18. Connect the Power Cables to Server" on
page 22. To connect the Ethernet cable:
Note: The twisted-pair connector is compatible with the IEEE 802.3 Ethernet network
10/100 Base T link.
1. Connect the twisted-pair cable to either twisted-pair connector (1) or (2).
2. The twisted-pair Ethernet cable is now installed. Continue with "Step 18. Connect
the Power Cables to Server" on page 22.
1
2
1
2
21
Chapter 1. Setting Up the System