IBM eServer pSeries 610 6C1 Installation Manual page 72

7. Refer to the documentation that was provided with the adapter for any cabling
instructions. It might be easier for you to route any cables before you install the
adapter.
8. If you are installing a long adapter, press on the touchpoint on the adapter retainer
flap (3) at the end of the slot nearest the front of the server, and rotate the adapter
retainer flap upward.
9. Remove the adapter from the antistatic package.
Attention: Avoid touching the components and gold-edge connectors on the
10. Place the adapter, component-side up, on a flat, static-protective surface.
11. Set any jumpers or switches as described by the adapter manufacturer.
56
Installation Guide
adapter.
4
3
1 Adapter retention latch
2 Tab
3 Adapter retainer flap
4 Adapter
1
2