Step 19. Are You Installing A Model 6C1 (Rack Mount) - IBM eServer pSeries 610 6C1 Installation Manual

Step 19. Are You Installing a Model 6C1 (Rack Mount)?

If you are installing a Model 6C1, continue with this step. If you are installing a Model
6E1 (Tower), go to "Step 20. Connect the Power Cables to Electrical Outlets" on
page 25.
1. Route the power cords, mouse cable, and keyboard cable through the
cable-restraint bracket.
2. Route all cables through the cable-management arm, attaching the cables to the
arm with the hook and loop fastener strips provided. The wraps are provided for
additional cable management.
24
Installation Guide