IBM eServer pSeries 610 6C1 Installation Manual page 71

1
2
3
6. Remove the expansion-slot cover:
a. Rotate the adapter retention latch (1) counterclockwise.
b. Raise the tab (2) on the adapter guide over the tab on the top corner of
adapter.
c. Remove the expansion-slot cover from the server (3). Store it in a safe place
for future use.
Attention: Expansion-slot covers must be installed on all vacant slots. This
maintains the electromagnetic emissions characteristics of the
system and ensures proper cooling of system components.
2
1
Adapter retention latch
Tab
Expansion-slot cover
Chapter 3. Installing Options in Your System
3
55