Configure Service Groups - NETGEAR FVS318G Reference Manual

Vpn firewall
Hide thumbs Also See for FVS318G:
Table of Contents

Advertisement

Add DMZ WAN Outbound Services screen for IPv6
Services screen
These are the default QoS profiles that are preconfigured and that cannot be edited:
Normal-Service. Used when no special priority is given to the traffic. IP packets are
marked with a ToS value of 0.
Minimize-Cost. Used when data must be transferred over a link with a lower cost. IP
packets are marked with a ToS value of 2.
Maximize-Reliability. Used when data must travel to the destination over a reliable link
and with little or no retransmission. IP packets are marked with a ToS value of 4.
Maximize-Throughput. Used when the volume of data transferred during an interval is
important even if the latency over the link is high. IP packets are marked with a ToS value
of 8.
Minimize-Delay. Used when the time required (latency) for the packet to reach the
destination must be low. IP packets are marked with a ToS value of 16.

Configure Service Groups

A firewall is a security mechanism that lets network administrators selectively block or allow
certain types of traffic in accordance with rules that they specify.
When you create a firewall rule, you select a service to which the firewall rule applies. Use
the Service Group screen to create custom service groups for which firewall rules can be
defined. Once defined, the new service group appears in the Service list of the screens you
use to add or edit firewall rules.
To add a custom service group:
1.
Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
NETGEAR ProSAFE VPN Firewall FVS318G v2
Firewall Protection
184

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Prosafe fvs318g v2

Table of Contents