NETGEAR FVS318G Reference Manual page 377

database. For information about how to edit the Known PCs and Devices table or manually
add entries to the table, see
If the VPN firewall is rebooted, the data in the Known PCs and Devices table is lost until the
VPN firewall rediscovers the devices.
To view the attached devices on the LAN Groups screen:

1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
2. Select Network Configuration > LAN Setup > LAN Groups.
For each attached computer or device, the Known PCs and Devices table displays the
following fields:
• Check box. Allows you to select the computer or device in the table.
• Name. The name of the computer or device. For computers that do not support the
NetBIOS protocol, the name is displayed as Unknown (you can edit the entry
manually to add a meaningful name). If the computer or device was assigned an IP
address by the DHCP server, the name is appended by an asterisk.
• IP Address. The current IP address of the computer or device. For DHCP clients of
the VPN firewall, this IP address does not change. If a computer or device is assigned
a static IP address, you must update this entry manually after the IP address on the
computer or device changes.
• MAC Address. The MAC address of the computer's or device's network interface.
NETGEAR ProSAFE VPN Firewall FVS318G v2
Manage the Network Database
Monitor System Access and Performance
377
on page 73.