NETGEAR FVS318G Reference Manual page 363

NETGEAR ProSAFE VPN Firewall FVS318G v2
The following table explains the fields of the Router Status screen:
Table 80. Router Status screen information
Item
System Info
System Name
Firmware Version
LAN (VLAN) Information
For each of the LAN ports, the screen shows the IP address and subnet mask. For more detailed
Table 82
information, see on page 367.
LAN IPv4/IPv6 Information
MAC Address
IPv6 Address
DHCP Server
DHCP Relay
DHCPv6 Server
DMZ IPv6 Information
IPv6 Address
DHCPv6 Server
WAN Information
WAN (IPv4)
WAN (IPv6)
Description
The NETGEAR system name.
The installed firmware version.
The MAC address of the VPN firewall.
The IPv6 address that is assigned to the VPN firewall. For information
about configuring the IPv6 address, see
Connection and WAN Settings
The status of the IPv4 DHCP server (Enabled or Disabled). For information
about configuring the IPv4 DHCP server, see
page 61.
The status of the IPv4 DHCP relay (Enabled or Disabled). For information
about configuring the IPv4 DHCP relay, see
page 61.
The status of the DHCPv6 server (Enabled or Disabled) for the LAN. For
information about configuring the DHCPv6 server for the LAN, see
the IPv6 LAN
on page 78.
The IPv6 address that is assigned to the DMZ port. For information about
configuring the IPv6 address for the DMZ, see
DMZ Port for IPv4 and IPv6 Traffic
The status of the DHCPv6 server (Enabled or Disabled) for the DMZ. For
information about configuring the DHCPv6 server for the DMZ, see
and Configure the DMZ Port for IPv4 and IPv6 Traffic
The IPv4 address, subnet mask, gateway, and status of the port (UP or
Down). For more detailed information, see
The IPv6 address, gateway, and status of the port (UP or Down). For more
detailed information, see
Monitor System Access and Performance
363
Configure the IPv6 Internet
on page 38.
Configure a VLAN Profile
Configure a VLAN Profile
Enable and Configure the
on page 96.
Table 82
Table 82
on page 367.
on
on
Manage
Enable
on page 96.
on page 367.