NETGEAR FVS318G Reference Manual page 53

a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
2. Select Network Configuration > WAN Settings > Broadband ISP Settings.
The Broadband ISP Settings screen displays the IPv4 settings.
3. Click the Advanced option arrow in the upper right of the screen.
4. Enter the settings as described in the following table:
Table 10. Broadband Advanced Options screen settings
Setting
MTU Size
Make one of the following selections:
Default
NETGEAR ProSAFE VPN Firewall FVS318G v2
Description
Select the Default radio button for the normal maximum transmit unit (MTU)
value. For most Ethernet networks, this value is 1500 bytes, or 1492 bytes for
PPPoE connections.
IPv4 and IPv6 Internet and Broadband Settings
53