NETGEAR FVS318G Reference Manual page 229

2. In the tree list pane of the Configuration Panel screen, right-click VPN Configuration, and
select New Phase 1.
3. Change the name of the authentication phase (the default is Gateway):
a. Right-click the authentication phase name.
b. Select Rename.
c. Type vpn_client.
d. Click anywhere in the tree list pane.
This is the name for the authentication phase that is used only for the VPN client, not
during IKE negotiation. You can view and change this name in the tree list pane. This
name must be a unique name.
Virtual Private Networking Using IPSec and L2TP Connections
NETGEAR ProSAFE VPN Firewall FVS318G v2
229