NETGEAR FVS318G Reference Manual page 352

Table 78. Broadband Traffic Meter screen settings (continued)
Setting
When Limit is reached
Block Traffic
Send e-mail alert
4. Click the Apply button.
Your changes are saved.
To display a report of the Internet traffic by type:

1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
2. Select Monitoring > Traffic Meter.
The Broadband Traffic Meter screen displays.
NETGEAR ProSAFE VPN Firewall FVS318G v2
Description
Select which action the VPN firewall performs when the traffic limit is reached:
• Block All Traffic. All incoming and outgoing Internet and email traffic is
blocked.
• Block All Traffic Except E-Mail. All incoming and outgoing Internet traffic is
blocked, but incoming and outgoing email traffic is still allowed.
An email alert is sent when traffic is blocked. Ensure that emailing of logs is enabled
on the Firewall Logs & E-mail screen (see
Notifications
on page 353).
Monitor System Access and Performance
352
Configure Logging, Alerts, and Event