NETGEAR FVS318G Reference Manual page 298

4. Enter the settings as described in the following table:
Table 68. Add Users screen settings
Setting
User Name
User Type
Select Group
Password
Confirm Password This field must be identical to the password that you entered in the Password field.
Idle Timeout
5. Click the Apply button.
Your changes are saved.
You cannot delete the default admin, user, or guest user.
To delete one or more user accounts:

1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
NETGEAR ProSAFE VPN Firewall FVS318G v2
Description
A descriptive (alphanumeric) name of the user for identification and management
purposes.
From the list, select one of the predefined user types that determines the access
credentials:
• Administrator. A user with full access and the capacity to change the VPN
firewall configuration (that is, read/write access).
• Guest User. A user who can only view the VPN firewall configuration (that is,
read-only access).
• IPSEC VPN User. A user who can make an IPSec VPN connection only through
a NETGEAR ProSafe VPN Client, and only when the XAUTH feature is enabled
Configure Extended Authentication (XAUTH)
(see
• L2TP User. A user who can connect over an L2TP connection to an L2TP client
that is located behind the VPN firewall.
The list shows the groups that are listed on the Group screen. From the list, select the
group to which the user is assigned. For information about how to configure groups,
Configure Groups
see on page 292.
Note: The user is assigned to the domain that is associated with the selected group.
The password that the user must enter to gain access to the VPN firewall.
The period after which an idle user is automatically logged out of the web management
interface. The default idle time-out period is 5 minutes.
Manage Users, Authentication, and VPN Certificates
298
on page 257).