IPv6 DMZ WAN Outbound Service Rules
To create an IPv6 DMZ WAN outbound rule:
1.
Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
2.
Select Security > Firewall > DMZ WAN Rules.
The DMZ WAN Rules screen displays.
3.
Select the IPv6 radio button.
The screen displays the IPv6 settings.
4.
Click the Add table button under the Outbound Services table.
5.
Enter the settings as described in
In addition to selections from the Service, Action, and Log lists, you must make
selections from the following lists:
•
DMZ Users
NETGEAR ProSAFE VPN Firewall FVS318G v2
Table 29
on page 128.
Firewall Protection
149