NETGEAR FVS318G Reference Manual page 200

c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
2. Select Security > Address Filter > IP/MAC Binding.
3. In the Email IP/MAC Violations section, specify if you want to enable email logs for IP/MAC
binding violations.
You must do this only once. Select one of the following radio buttons:
• Yes. IP/MAC binding violations are emailed. Click the Firewall Logs & E-mail page
link to ensure that emailing of logs is enabled on the Firewall Logs & E-mail screen
Configure Logging, Alerts, and Event Notifications
(see
• No. IP/MAC binding violations are not emailed.
4. Click the Apply button.
Your changes are saved.
5. In the IP/MAC Bindings sections of the screen, enter the settings as described in the
following table:
Table 38. IP/MAC Binding screen settings for IPv4
Setting Description
Name A descriptive name of the binding for identification and management purposes.
MAC Address The MAC address of the computer or device that is bound to the IP address.
NETGEAR ProSAFE VPN Firewall FVS318G v2
Firewall Protection
200
on page 353).