NETGEAR FVS318G Reference Manual page 300

3. In the Action column of the List of Users table, for the user for which you want to set login
policies, click the Policies table button.
4. Make the following optional selections:
• To prohibit the user from logging in to the VPN firewall, select the Disable Login
check box.
• To prohibit the user from logging in from the WAN interface, select the Deny Login
from WAN Interface check box.
In this case, the user can log in only from the LAN interface.
For security reasons, the Deny Login from WAN Interface check box is selected by
default for guests and administrators. The Disable Login check box is disabled (masked
out) for administrators.
5. Click the Apply button.
Your changes are saved.
Configure Login Restrictions Based on IPv4 Addresses
To restrict logging in based on IPv4 addresses:

1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
2. Select Users > Users.
The Users screen displays.
3. In the Action column of the List of Users table, for the user for which you want to set login
policies, click the Policies table button.
NETGEAR ProSAFE VPN Firewall FVS318G v2
Manage Users, Authentication, and VPN Certificates
300