Bottom Panel with Product Label
The product label on the bottom of the VPN firewall's enclosure displays factory default
settings, regulatory compliance, and other information.
Figure 4. Product label
Choose a Location for the VPN Firewall
The VPN firewall is suitable for use in an office environment where it can be freestanding (on
its runner feet) or mounted on a wall. Alternatively, you can rack-mount the VPN firewall in a
wiring closet or equipment room.
Consider the following when deciding where to position the VPN firewall:
•
The unit is accessible, and cables can be connected easily.
•
Cabling is away from sources of electrical noise. These include lift shafts, microwave
ovens, and air-conditioning units.
•
Water or moisture cannot enter the case of the unit.
•
Airflow around the unit and through the vents in the side of the case is not restricted.
Provide a minimum of 25 mm or 1 inch clearance.
•
The air is as free of dust as possible.
•
Temperature operating limits are not likely to be exceeded. Install the unit in a clean,
air-conditioned environment. For information about the recommended operating
NETGEAR ProSAFE VPN Firewall FVS318G v2
Introduction
17