NETGEAR FVS318G Reference Manual page 30

• If the autodetect process senses a connection method that requires input from you, it
prompts you for the information. The following table explains the settings that you
might need to enter:
Table 2. IPv4 Internet connection methods
Connection Method Manual Data Input Required
DHCP (Dynamic IP)
PPPoE
PPTP
Fixed (Static) IP
• If the autodetect process does not find a connection, you are prompted either to
check the physical connection between your VPN firewall and the cable, DSL line, or
satellite or wireless Internet dish, or to check your VPN firewall's MAC address. For
more information, see
Troubleshoot the ISP Connection
page 52 and
4. To verify the connection, click the Broadband Status option arrow.
NETGEAR ProSAFE VPN Firewall FVS318G v2
No manual data input is required.
The following fields are required:
• Login
• Password
• Account Name
• Domain Name
The following fields are required:
• Login
• Password
• Account Name
• Domain Name
• My IP Address
• Server IP Address
The following fields are required:
• IP Address
• IP Subnet Mask
• Gateway IP Address
• Primary DNS Server
• Secondary DNS Server
Configure Advanced WAN Options and Other Tasks
IPv4 and IPv6 Internet and Broadband Settings
30
on page 389.
on