NETGEAR FVS318G Reference Manual page 115

3. Click the RIP Configuration option arrow.
4. Enter the settings as described in the following table:
Table 25. RIP Configuration screen settings
Setting
RIP
RIP Direction
RIP Version
NETGEAR ProSAFE VPN Firewall FVS318G v2
Description
Select the direction in which the VPN firewall sends and receives RIP packets:
• None. The VPN firewall neither advertises its routing table nor accepts any
RIP packets from other routers. This effectively disables RIP and is the default
setting.
• In Only. The VPN firewall accepts RIP information from other routers but does
not advertise its routing table.
• Out Only. The VPN firewall advertises its routing table but does not accept
RIP information from other routers.
• Both. The VPN firewall advertises its routing table and also processes RIP
information received from other routers.
By default, the RIP version is set to Disabled. From the RIP Version list, select the
version:
• RIP-1. Classful routing that does not include subnet information. This is the
most commonly supported version.
• RIP-2. Routing that supports subnet information. Both RIP-2B and RIP-2M
send the routing data in RIP-2 format:
- RIP-2B. Sends the routing data in RIP-2 format and uses subnet
broadcasting.
- RIP-2M. Sends the routing data in RIP-2 format and uses multicasting.
LAN Configuration
115