NETGEAR FVS318G Reference Manual page 143

5. Click the Apply button.
Your changes are saved.
IPv6 LAN WAN Inbound Rules
To create an IPv6 LAN WAN inbound rule:

1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
2. Select Security > Firewall.
The LAN WAN Rules screen displays.
3. In the upper right of the LAN WAN Rules screen, select the IPv6 radio button.
The screen displays the IPv6 settings.
4. Under the Inbound Services table, click the Add table button.
5. Enter the settings as described in
In addition to selections from the Service, Action, and Log lists, you must make
selections from the following lists:
NETGEAR ProSAFE VPN Firewall FVS318G v2
Table 30
on page 131.
Firewall Protection
143