NETGEAR FVS318G Reference Manual page 296

Two default user accounts are available:
• A user with the name admin and the password password. This is a user who is assigned
read/write access, is associated with the domain geardomain, and is denied login from
the WAN interface by default. The user name is appended by an asterisk. You cannot
delete this user account.
• A user with the name guest and the password password. This is a user who is assigned
read-only access, is associated with the domain geardomain, and is denied login from the
WAN interface by default. The user name is appended by an asterisk. You cannot delete
this user account.
You can create five different types of user accounts by applying one of the predefined user
types:
• Administrator. A user who is assigned full access and the capacity to change the VPN
firewall configuration (that is, read-write access).
• Guest user. A user who can only view the VPN firewall configuration (that is, read-only
access).
• IPSec VPN user. A user who can make an IPSec VPN connection only through a
NETGEAR ProSafe VPN Client, and only when the XAUTH feature is enabled (see
Configure Extended Authentication (XAUTH)
• L2TP user. A user who can connect over an L2TP connection to an L2TP client that is
located behind the VPN firewall.
To create a user account:

1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
NETGEAR ProSAFE VPN Firewall FVS318G v2
Manage Users, Authentication, and VPN Certificates
296
on page 257).