Configure Domains, Groups, And Users; Configure Applications For Port Forwarding - NETGEAR UTM5 Reference Manual


To edit a portal layout:
1. On the Portal Layouts screen (see
Action column for the portal layout that you want to modify. The Edit Portal Layout
screen displays. This screen is identical to the Add Portal Layout screen (see the
previous figure).
2. Modify the settings as explained in the previous table.
3. Click Apply to save your settings.

To delete one or more portal layouts:
1. On the Portal Layouts screen (see
left of each portal layout that you want to delete, or click the Select All table button to
select all layouts. (You cannot delete the SSL-VPN default portal layout.)
2. Click the Delete table button.

Configure Domains, Groups, and Users

Remote users connecting to the UTM through an SSL VPN portal need to be authenticated
before they are granted access to the network. The login screen that is presented to the user
requires three items: a user name, a password, and a domain selection. The domain
determines both the authentication method and the portal layout that are used.
You need to create name and password accounts for the SSL VPN users. When you create a
user account, you need to specify a group. Groups are used to simplify the application of
access policies. When you create a group, you need to specify a domain. Therefore, you
should create any domains first, then groups, and then user accounts.
For information about how to configure domains, groups, and users, see
Authentication Domains, Groups, and Users

Configure Applications for Port Forwarding

Port forwarding provides access to specific defined network services. To define these
services, you need to specify the internal server addresses and port numbers for TCP
applications that are intercepted by the port-forwarding client on the user's PC. This client
reroutes the traffic to the UTM.
Add Servers and Port Numbers
To configure port forwarding, you need to define the IP addresses of the internal servers and
the port number for TCP applications that are available to remote users.

To add a server and a port number:
1. Select VPN > SSL VPN > Port Forwarding. The Port Forwarding screen displays. (The
following figure shows an example.)
ProSecure Unified Threat Management (UTM) Appliance
Figure 207
Figure 207
Virtual Private Networking Using SSL Connections
on page 338), click the Edit button in the
on page 338), select the check box to the
on page 358.
341
Configure