NETGEAR FVS318G Reference Manual page 204

4. In the Email IP/MAC Violations section, specify if you want to enable email logs for IP/MAC
binding violations.
You must do this only once. Select one of the following radio buttons:
• Yes. IP/MAC binding violations are emailed. Click the Firewall Logs & E-mail page
link to ensure that emailing of logs is enabled on the Firewall Logs & E-mail screen.
For more information, see
page 353.
• No. IP/MAC binding violations are not emailed.
5. Click the Apply button.
Your changes are saved.
6. In the IP/MAC Bindings sections, enter the settings as described in the following table:
Table 39. IP/MAC Binding screen settings for IPv6
Setting
Name
MAC Address
IP Address
Log Dropped
Packets
7. Click the Add table button.
The new IP/MAC rule is added to the IP/MAC Bindings table.
To edit an IP/MAC binding:

1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
2. Select Security > Address Filter > IP/MAC Binding.
The IP/MAC Binding screen displays.
NETGEAR ProSAFE VPN Firewall FVS318G v2
Configure Logging, Alerts, and Event Notifications
Description
A descriptive name of the binding for identification and management purposes.
The MAC address of the computer or device that is bound to the IP address.
The IPv6 address of the computer or device that is bound to the MAC address.
To log the dropped packets, select Enable from the list. The default setting is Disable.
Firewall Protection
204
on