10. Removal and installation of projector covers
10.5 Removal of the rear cover
W
ARNING
Necessary tools
7 mm flat screwdriver.
How to remove the rear cover from the projector?
1. Release the two captive screws at the bottom corners of the rear cover, using a flat screw driver.
Image 10-9
2. Remove the rear cover of the projector doing the following:
a) gently pull out the top corners of the rear cover,
b) then move the rear cover away from the projector.
A
Image 10-10
90
:
This procedure may only be performed by qualified technical service personnel.
A
B
R59770242 DP-1200 06/01/2009