Table of Contents
Advertisement
4. Lamp & Lamp House
4.1
Introduction
Lamp & lamp house
Normally the lamp house of the DP-1200 projector is delivered with a mounted 2000 watt lamp. In case the xenon bulb lamp is
delivered separately the lamp has to be installed on site by a qualified service technician.
Image 4-1
A
Lamp house.
B
Xenon bulb lamp.
The xenon bulb lamp is packed in a protective container or wrapped in a protective cloth. Never remove this protective container or
protective cloth without wearing adequate protective clothing (face shield, clean cotton glovers, welder's jacket).
Image 4-2
Left: Xenon bulb lamp in protective container. Right: Xenon bulb lamp wrapped in protective cloth.
C
AUTION
of the bulb increases the pressure to a level at which the bulb may explode if not handled in strict accordance
to the manufacturer's instructions. The bulb is stable at room temperature, but may still explode if dropped
or otherwise mishandled. Whenever the lamp house, containing a xenon bulb lamp, has to be dismantled or
whenever the protective container or cloth has to be removed from the xenon bulb lamp, authorized protective
clothing MUST be worn!
Cathode adaptor
A cathode adaptor is required to mount the xenon bulb lamp in the lamp house. The cathode adapter has to be mount upon the
cathode side of the xenon bulb lamp prior to mount the lamp in the lamp house. The purpose of the cathode adapter is to position
the arc of the xenon bulb lamp in the middle of the reflector inside the lamp house.
Image 4-3
Cathode adaptor (R858100K)
Supported xenon bulb lamps (without lamp house)
Lamp
Osram xenon bulb lamp of 2 kW
28
:
Xenon compact arc lamps are highly pressurized. When ignited, the normal operating temperature
A
Type
2kW DHP
B
Order info
R9855956
R59770242 DP-1200 06/01/2009
Advertisement
Table of Contents
