Replacement Of The Dust Filter On The Top Side - Barco DP-1200 Installation Manual

11. Maintenance
11.2 Replacement of the dust filter on the top side
Necessary parts
New HEPA dust filter for the top side.
How to replace the HEPA dust filter on the top side of the projector ?
1. Remove the side cover of the projector.
2. Remove the filter (F) on the bottom side by pulling out the filter holder (H) as illustrated.
Image 11-3
3. Place a new HEPA dust filter in the filter holder.
4. Reinstall the filter holder containing the new HEPA filter.
5. Reinstall the side cover of the projector.
C
AUTION
104
:
Never install a used HEPA filter. Always install a new HEPA filter.
F
H
R59770242 DP-1200 06/01/2009