Installation Of The Xenon Bulb Lamp - Barco DP-1200 Installation Manual

Hide thumbs Also See for DP-1200:
Table of Contents

Advertisement

4.4

Installation of the xenon bulb lamp

W
ARNING
XENON BULB LAMP HANDLING OR SERVICE.
W
ARNING
C
AUTION
of the bulb increases the pressure to a level at which the bulb may explode if not handled in strict accordance
to the manufacturer's instructions. The bulb is stable at room temperature, but may still explode if dropped
or otherwise mishandled. Whenever the lamp house, containing a xenon bulb lamp, has to be dismantled or
whenever the protective container or cloth has to be removed from the xenon bulb lamp, authorized protective
clothing MUST be worn!
W
ARNING
lamps.
W
ARNING
W
ARNING
This procedure assumes that the lamp house is closed and that there is no xenon bulb lamp installed inside
the lamp house.
Necessary tools
17 mm open ended wrench.
Torque wrench with 17 mm hexagon socket
Torque wrench with 5 mm Allen socket.
Necessary parts
Lamp cathode adapter.
Hexagon socket head screw M6 x 40.
Plane washer.
How to install the xenon bulb lamp into the lamp house?
1. Ensure that you wear protective clothing, a full face shield and protective gloves.
2. Remove the UV blocker and side cover of the lamp house by releasing the retaining thumbscrews as illustrated.
Note: In case of a lamp replacement, the UV blocker will be already removed.
R59770242 DP-1200 06/01/2009
:
DO NOT PERMIT UNAUTHORIZED PERSONNEL TO PERFORM OR ATTEMPT ANY PHASE OF
:
This procedure may only be performed by qualified technical service personnel.
:
Xenon compact arc lamps are highly pressurized. When ignited, the normal operating temperature
:
Always wear face protection (full face shield with neck protector) when handling xenon bulb
:
Always wear protective clothing (welder's jacket) when handling xenon bulb lamps.
:
Always wear clean leather gloves with wrist protectors when handling xenon bulb lamps.
4. Lamp & Lamp House
35

Advertisement

Table of Contents
loading

Table of Contents