10.2 Removal of the input cover
W
ARNING
Necessary tools
7 mm flat screw driver.
How to remove the input cover of the projector?
1. Release the two captive screws at the top and bottom left side of the input cover, using a flat screw driver.
Image 10-3
2. Remove the input cover from the projector doing the following:
a) gently pull out the right bottom corner (A) of the input cover,
b) then gently pull out the right top corner (B) of the input cover,
c) then move the input cover away from the projector (C).
B
A
Image 10-4
R59770242 DP-1200 06/01/2009
:
This procedure may only be performed by qualified technical service personnel.
10. Removal and installation of projector covers
C
87