Table of Contents
Advertisement
4. Lamp & Lamp House
4.2
Removal of the lamp house
W
ARNING
C
AUTION
minutes before proceeding to the lamp unit replacement.
C
AUTION
handled.
Necessary tools
7 mm flat screw driver.
How to remove the lamp house of the projector ?
1. Switch off the projector.
2. Remove the lamp cover.
3. Release the three spring lock screws of the lamp house as illustrated.
Image 4-4
4. Hold fast the lamp house by the handles and pull the lamp house out of the projector.
Caution:
Beware of the weight of the lamp assembly. Take the necessary precautions to avoid personal injury.
Image 4-5
5. Place the lamp house on a stable support.
30
:
This procedure may only be performed by qualified technical service personnel.
:
Lamp casing is very hot after operation. To avoid burns, let the projector cool down for at least 15
:
Due to its high internal pressure, the lamp may explode in either hot or cold states if improperly
R59770242 DP-1200 06/01/2009
Advertisement
Table of Contents
