Table of Contents
Advertisement
10. Removal and installation of projector covers
10.13 Installation of the input cover
Necessary tools
7 mm flat screw driver.
How to install the input cover of the projector?
1. Install the input cover of the projector doing the following:
a) Bring the input cover towards its final position (A),
b) then gently push the locking stud at the right top corner (B) into its receiver,
c) then gently push the locking stud at the right bottom corner (C) into its receiver.
A
Image 10-25
2. Secure the input cover by locking the two captive screws at the left side of the input cover.
Image 10-26
98
B
C
R59770242 DP-1200 06/01/2009
Advertisement
Table of Contents
