Table of Contents
Advertisement
10. Removal and installation of projector covers
10.11 Installation of the side cover
Necessary tools
7 mm flat screw driver.
How to install the side cover of the projector?
1. Check if the bottom and top filters are present.
2. Install the side cover of the projector doing the following:
a) Bring the side cover towards its final position (A),
b) then gently push the locking studs of the top corners (B) into their receivers,
c) then gently push the locking studs of the bottom corners (C) into their receivers.
Image 10-21
3. Secure the side cover by locking the captive screw in the middle at the bottom of the side cover.
Image 10-22
96
A
B
C
R59770242 DP-1200 06/01/2009
B
C
Advertisement
Table of Contents
