Enter Your Call Sign (My) Into The Transceiver - Icom IC-705 Advanced Manual

13. D-STAR OPERATION (BASIC)

Enter your call sign (MY) into the transceiver

To operate D-STAR, you must first enter your call
sign into the MY call sign memory. You can enter
up to 6 MY call signs.
NOTE:
• Your MY call sign must match the call sign
registered on a gateway repeater. (p. 13-4)
• The MY Call sign in the instructions is ONLY an
example that is used in explanations.
You MUST enter your own call sign, the one that
was assigned to you and is on your license.
Example: Enter "JA3YUA" as your own call sign
into "1."
1. Open the MY CALL SIGN screen.
» SET > My Station > My Call Sign
2. Touch the number for 1 second.
3. Touch "Edit."
4. Enter your own call sign, then touch [ENT].
5. Touch the entered call sign.
• Sets the call sign to be used as MY call sign.
6. To close the MY STATION screen, push
several times.
TIP: You can enter a note of up to 4 characters,
such as the model of the transceiver, name,
area name, after your call sign.
13-3