Configuring The Toner Saving Setting - Kyocera FS-C1020MFP+ Operation Manual

8. Configuring the Machine Using COMMAND CENTER
Item
Copier
Fax
• If tray 2 is not installed, only [Tray 1] appears.
• For details about copy paper selection, see p.310 "Specifying the Size of Paper for Printing
Copies".
• For details about fax tray selection, see p.310 "Configuring the Fax Settings".

Configuring the Toner Saving Setting

Click the [Toner Saving] tab on the system settings page to configure the toner saving setting.
314
Select the tray that the machine uses first for printing out copies from tray 1
or tray 2.
If [A4] or [8 1/2 × 11] is selected for [Select Paper] in the [Copier] page
and both tray 1 and tray 2 contain paper of that size, the machine starts to
print from the specified tray. If that tray runs out of paper, the machine
automatically switches to the other tray to continue printing.
Select the tray that the machine uses first for printing out faxes from tray 1 or
tray 2.
If [Auto] is selected for [Select Paper Tray] in the [Fax] page and both tray
1 and tray 2 contain paper of the same size, the machine starts to print from
the specified tray. If that tray runs out of paper, the machine automatically
switches to the other tray to continue printing.
Description