Toshiba e-studio550 Service Manual page 318

(G-3) Original length sensor
(1) Remove the lower guide.
(2) Remove 1 screw, disconnect 1 connector and
take off the original length sensor with the
bracket.
(3) Remove 1 screw and release the original
length sensor from the bracket.
(G-4) Cover open/close switch
(1) Remove the ADF rear cover.
(2) Remove 1 screw and take off the cover open/
close switch.
(G-5) Tray sensor
(1) Open the tray, remove 3 screws and take off
the back cover.
(2) Disconnect 1 connector, release the latches
and take off the tray sensor.
JUNE 2002 © TOSHIBA TEC
Tray sensor
16 - 81
Original length sensor
Cover open/close switch
Back cover
e-STUDIO550/650/810 RADF