Toshiba e-studio550 Service Manual page 268

The large original exit motor starts to slow down when the trailing edge of the original has proceeded a
specified distance after passing the 4th roller. At the same time, the read motor stops rotating unless
there is a next original.
The large original exit motor stops rotating when the trailing edge of the original has proceeded a
specified distance after being detected by the large original exit sensor. Then the original is discharged.
If this is the last original, the operation ends when the large original exit solenoid turns OFF.
JUNE 2002 © TOSHIBA TEC 16 - 31 e-STUDIO550/650/810 RADF