(9) Remove 4 screws and take off the guide.
(10)Remove 1 clip, displace the shaft and take off
the separation roller.
(11)Remove 2 screws for each bracket and release
2 fixing brackets. Then take off the bypass tray.
(12)Remove 3 screws, release 4 latches and take
off the bypass tray upper cover.
e-STUDIO550/650/810 PAPER FEEDING SYSTEM
Latch
9 - 18
Separation roller
Clip
Fixing bracket
Bypass tray upper cover
JUNE 2002 © TOSHIBA TEC
Latch