[G] Tandem LCF
(G-1) Feed side front guide
(1) Remove 2 screws fixing the feed side front guide.
(2) Lift the paper guide a little and insert it in the
groove of the paper size marking. Then tighten
up the screw after confirming the screw hole
position.
(G-2) Feed side rear guide
(1) Remove 2 screws fixing the feed side rear guide.
(2) Lift the paper guide a little and insert it in the
groove of the paper size marking. Then tighten
up the screw after confirming the screw hole
position.
e-STUDIO550/650/810 PAPER FEEDING SYSTEM
A4
9 - 22
Paper size marking
LT
Paper size marking
LT
A4
JUNE 2002 © TOSHIBA TEC