Toshiba e-studio550 Service Manual page 146

(G-3) Standby side front guide
(1) Remove 1 screw fixing the standby side front
guide and move the guide toward the
direction of the white arrow.
(2) Lift the paper guide a little and insert it in the
groove of the paper size marking. Then tighten
up the screw after confirming the screw hole
position.
(G-4) Standby side rear guide
(1) Remove 1 screw fixing the standby side rear
guide and move the guide toward the direction
of the white arrow.
(2) Lift the paper guide a little and insert it in the
groove of the paper size marking. Then tighten
up the screw after confirming the screw hole
position.
JUNE 2002 © TOSHIBA TEC 9 - 23 e-STUDIO550/650/810 PAPER FEEDING SYSTEM
LT
A4
LT A4