11. 4. 3. Outline of control
Start controlling (e.g. during the pre-running after the power has been turned ON)
[1] Setting of the reference image formation condition
[2] Adjustment of the sensor light source
[3] Formation of the test pattern
[4] Reading of the value for the image quality sensor
[5] Determination
(Is the toner amount of the test pattern within the permissible amount?)
YES
[7] Finish controlling
(Reflecting the determined image formation condition to the following printing)
e-STUDIO550/650/810 DRUM/CLEANER UNIT
NO
[6] Changing of the image formation condition
11 - 4
Back to [3]
JUNE 2002 © TOSHIBA TEC