[E] Surface potential sensor
(1) Take off the developer unit, main charger,
cleaner unit and control panel bottom cover.
(2) Disconnect 1 connector, remove 1 screw and
take off the bracket.
(3) Disconnect 1 connector, remove 1 screw and
take off the surfave potential sensor.
[F] Temperature/humidity sensor
(1) Take off the control panel unit (
(2) Disconnect 1 connector, remove 1 screw and
take off the temperature humidity sensor.
JUNE 2002 © TOSHIBA TEC
Bracket
Connector
Chap.5.5).
Temperature/humidity sensor
10 - 11
e-STUDIO550/650/810 PROCESS RELATED SECTION
Surfave potential sensor