Toshiba e-studio550 Service Manual page 168

11. 5. Disassembly and Replacement
[A] Cleaner unit
(1) Open the front cover and take off the front
side right inner cover, toner cartridge drive
unit, toner recycle unit, developer unit and
main charger.
(2) Remove 2 screws and pull out the cleaner
unit.
[B] Drum thermistor/Drum
(1) Disconnect 1 connector and remove 1 screw.
Then take off the drum thermistor with the
bracket.
(2) Turn the cam to release the pressure of the
cleaning blade.
(3) Remove 1 screw and take off the drum shaft.
(4) Pull out the drum upward.
e-STUDIO550/650/810 DRUM/CLEANER UNIT
Cleaner unit
Connector
Cam
11 - 6
Main charger
Drum thermistor
Drum shaft
JUNE 2002 © TOSHIBA TEC