Toshiba e-studio550 Service Manual page 136

(A-2) Empty sensor/Tray-up sensor/Transport sensor
(1) Disconnect 1 connector and take off the empty/
tray-up sensors.
(2) Disconnect 1 connector, remove 1 screw and
take off the transport sensor.
Note: Make sure to put on the spring properly after
replacing the sensors.
Spring
JUNE 2002 © TOSHIBA TEC
Empty sensor
9 - 13 e-STUDIO550/650/810 PAPER FEEDING SYSTEM
Connector
Tray-up sensor
Spring