16. 5. 3. A4 single-sided feeding
(Operational condition: A3 original/Reproduction ratio: 100%)
(1) Original setting
Same operation as 16.5.1.(1)
(2) Lifting of the lifting tray
Same operation as 16.5.1.(2)
(3) Start of separating
Same operation as 16.5.1.(3)
(4) Start of feeding
The feed motor starts to rotate in reverse. When the feed motor has completed acceleration, the read
motor starts to rotate forward. Both the feed and read motors start to slow down when the leading edge
of the original has come to a specified distance before the read sensor.
They stop rotating and the original stop signal turns ON when the leading edge of the original has been
detected by the read sensor then proceeded a specified distance.
e-STUDIO550/650/810 RADF
16 - 18
JUNE 2002 © TOSHIBA TEC